CMS Aquatec 3400 + 3400 5-Axis Twin Table CNC Waterjet Cutting System

STANDARD TECHNICAL FEATURES *

X Axis stroke 4,000 mm

Y Axis stroke 3,000 mm

Z Axis stroke 530 mm

X axes max feedrate 54000 mm/ min

Y axes max feedrate 54000 mm/ min

Z axes max feedrate 12600 mm/ min

X acceleration 2 m/ s2

Y acceleration 2 m/ s2

Z acceleration 1 m/ s2

XY Worktable area regular table 4000 x 2000 mm

XY Worktable area regular table 4000 x 3000 mm

Loading capacity 1000 Kg/ m2

Dynamic precision + / - 0,10 mm

Repeatability “ Ps” + / - 0,025 mm

Power 13 kW

 A 5 Axis Head provides 5 axes capability to the machine allowing chamfer and 3D cutting, produces more accurate parts at significantly higher cutting speeds than parts cut with conventional systems.

STANDARD TECHNICAL FEATURES *

B Axis +/- 60 °

C Axis +/- 340 °

B axes max feedrate 17200 °/min

C axes max feedrate 13400 °/min

B acceleration 1450 °/s2

C acceleration 850 °/s2

WORKING IN AREA 1 (2) AND LOADING/UNLOADING AREA 2 (1)

The machine allows to stop the photocells in area 2 (1) without interrupting the working operations in area 1 (2) only in the working unit is in area 1 (2), with photocells between the tanks activated.

The safety is granted by the photocells and the area limit switches avoiding the working unit to enter the area 2 (1) for loading/unloading.

Working area n°1 (front side)

X = 4000mm (X=0 right limit - X=-4000 left limit)

Y / V = 3000mm (Y=0 front limit – Y= to be defined rear limit)

Working area n°2 (rear side)

X = 4000mm (X=0 right limit - X=-4000 left limit)

Y / V = 3000mm (Y=3300 front limit – Y= to be defined rear limit)

PRESSURIZED ABRASIVE CONVEYING SYSTEM (330 KG

NUMERICAL CONTROL OSAI OPEN-M

PORTABLE CONTROL UNIT WITH REMOTE COMMANDS UP TO 6 AXES

DREDGE FOR ABRASIVE REMOVAL FROM THE TANK: 1ST DREDGE FOR 3040 TANK AND 2ND DREDGE FOR 3040 TANK

PROGRAMMING SOFTWARE EASYJET 5 AXES

It is a CAD/CAM software package installed in a personal computer working in Windows for the generation of work programs.

QTY (1) DDX PHOTO LICENSE & QTY (2) CAMERA IN ENCLOSURE & QTY (2) CAMERA STANDS

HIGH PRESSURE INTENSIFIER POWER 60 HP – PRESSURE 4130 BAR

JETPOWER EVO TECHNICAL FEATURES

Installed Power 60 (45) HP (kW)

Voltage (three-phase) 400 ± 5% Volt 50 - 60 Hz

Max water pressure 413,7 Mpa (60.000 PSI)

Max flow rate 5 (1.32) liters/minute (gal/min)

Water consumption from 0 to 5 (1.32) lliters/minute (gal/min)

Max diameter of the orifice 0,40 millimeters

Oil tank capacity 250 (39.6) liters (gal)

Cooling requirements Oil/water heat exchanger* 3.2 gal/min water @ max 70ºF *

Dimensions 900 x 1500 x 1560 H /millimeters

Weight 1350 kg